ALLOY-230 by Taashvi Special Alloys
Taashvi Special Alloys is a manufacturer and supplier of ALLOY-230, a nickel-chromium-tungsten-molybdenum alloy that is highly recognized for its exceptional ability to withstand high temperatures, carburization, and oxidation. This alloy is ideal for applications requiring high temperatures and resistance to corrosion since it is made to withstand extreme conditions and has exceptional strength, thermal stability, and corrosion resistance. Taashvi Special Alloys has ensured precise formulation and stringent quality checks, positioning ALLOY-230 as a trusted alternative for applications in the chemical processing, aerospace, and refining industries.
Key Points:
01 High-Temperature Strength: At elevated temperatures, alloy-230 demonstrates exceptional strength and stability, maintaining its mechanical characteristics even in the face of severe thermal stress.
02 Oxidation and Corrosion Resistance: Longevity and dependability in demanding conditions are ensured by this alloy's remarkable resistance to oxidation, carburization, and corrosive environments.
03 Chemical Processing: Because it can withstand a variety of corrosive environments and sulfur-containing atmospheres, alloy-230 is widely used in the chemical processing industry.
04 Aerospace Applications: Alloy-230 is an excellent material for important components in aircraft systems because of its strength at high temperatures and resistance to thermal cycling. This ensures dependability under harsh circumstances.
05 Refining Industry: It is a sturdy substance used in refining processes where strong, corrosion-resistant alloys are needed due to exposure to harsh chemicals and high temperatures.
06 Stringent Quality Standards: By upholding strict quality control procedures, Taashvi Special Alloys guarantees the consistency and dependability of ALLOY-230, satisfying the exacting demands of many industries.
Alloy 230 can be used in a variety of applications including:
- Transition ducts on turbine engines
- Combustion linings on turbine engines
- Furnace retorts
- Burner flame shrouds
- Vacuum heat treat fixtures
- Chains and fixtures
- Nitriding furnace internals
- Sparger tubes and recuperative internals
PRODUCT FORMS
| PRODUCT FORM | SIZE RANGE FROM | SIZE RANGE TO |
|---|---|---|
| Alloy 230 round bar | 12.7 mm | 152.4 mm |
| Alloy 230 sheet & plate | 0.4 mm | 38.1 mm |
CHEMICAL ANALYSIS
| % | NI | CR | W | MO | CO | AL | LA | MN | C | SI | PH | S | B | TI | CU | FE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min | 47 | 20 | 13 | 1 | - | 0.20 | 0.005 | 0.30 | 0.05 | 0.25 | - | - | - | - | - | - |
| Max | 65 | 24 | 15 | 3 | 5 | 0.50 | 0.005 | 1 | 0.15 | 0.75 | 0.03 | 0.015 | 0.015 | 0.10 | 0.50 | 3 |
MECHANICAL & PHYSICAL PROPERTIES
| MECHANICAL & PHYSICAL PROPERTIES | 21.1°C | 538°C | 649°C | 704°C | 760°C | 816°C | 871°C | 927°C | 982°C | 1093°C |
|---|---|---|---|---|---|---|---|---|---|---|
| Ultimate Tensile Strength/MPa | 841.2 | 703.3 | 6668.8 | - | 537.8 | - | 310.3 | - | 172.4 | 89.6 |
| 0.2% Yield Strength/MPa | 420.6 | 303.4 | 303.4 | - | 324.1 | - | 234.4 | - | 124.1 | 68.9 |
| Reduction of area | - | - | - | - | - | - | - | - | - | - |
| Elongation/% | 47 | 54 | 57 | - | 61 | - | 75 | - | 50 | 37 |
| Charpy Impact V-notch | - | - | - | - | - | - | - | - | - | - |
| Minimum Creep 0.0001% per hr | - | - | - | - | - | - | - | - | - | - |
| 10,000 hr Rupture Strength(MPa) | - | - | 186.2 | 127.6 | 91 | 57.9 | 38.6 | 22.1 | 7.6 | - |
Coil / Sheet /Plate Specification
Dimensions : ASTM, ASME, AISI, DIN, BIS
Thickness : 0.50mm - 100mm
Size : 1000 mm x 2000mm, 1220mm x 2440mm, 4' x 8', 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Shim Sheet, Perforated Sheet, Profile Cut,
Seamless & Welded Pipes & Tubes Specification
Specification : ASTM, ASME, DIN, NFA, JIS.
Thickness : 4.0mm - 100mm.
Pipe Size : 1/8” NB to 24” NB, 1/4” OD to 24” OD sizes.
Tube Size : 1/2" OD to 8" OD.
Length : Cut length, Fix length, Single Random, Double Random & Required Length.
Form : Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pancake Coils, Hydraulic Tubes.
End : Plain End, Beveled End, Threaded End.
Type : Seamless & Welded Pipes & Tubes.
Round Bar Specification
Dimensions : ASTM, ASME,AISI, API.
Size : 5 mm to 500 mm
Length : from 2.00mm to 6.35mm (0.078" to 0.25") dia.
Finish : Bright, Black, Polish, Forged
Form : Round Bar, Square, Hexagon
Condition : Cold Drawn & Polished Cold Drawn, Centerless Ground Bars & Polished
Other Services : Machining (CNC), Centerless Grinding (CG), Heat Treatment, Annealing, Pickling, Polish, Rolling, Forging, Cutting, Bending, Minor Fabrication
Seamless & Welded Pipes & Tubes Fittings Specification
Specification : ASTM, ASME, DIN, NFA, JIS.
Size : 1/8” NB to 24” NB, 1/4” OD to 24” OD sizes.
Form : Elbow, Tee, Reducer, Stub End, End Cap, Pipe Nipple, Weldolet,
End : Beveled End, Threaded. Plain End,
Type : Seamless & Welded Pipe & Tubes Fittings, Buttweld Fittings & Dairy Fittings.
