ALLOY 36

• Alloy 36
• Invar 36
• Nilo 36
• UNS K93600 / UNS K93603
• ASTM A1684
• FeNi36
• Alloy 1.3912

Invar 36 /Nilo 36 / Alloy 36 (ASTM F1684)

Technical Data Sheet

Alloy 36 (NILO 36, INVAR 36) is a Nickel-Iron, low expansion alloy which contains 36% Nickel. Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C). Invar 36 also retains good strength and toughness at cryogenic temperatures. Common applications include tooling for aerospace composites, standards of length, measuring devices, thermostat rods, laser components and tanks and piping for the storage and transportation of liquefied gases.

Chemical Composition Limits
Weight %	Ni	Fe	C	Mn	P	S	Si	Cr	Mo	Co
Invar 36	35-38	Rem	0.10 max	0.06 max	0.025 max	0.025 max	0.35 max	0.50 max	0.50 max	1.0 max

Typical Mechanical Properties

Material	Condition	Ultimate Tensile Strength		Yield Strength 0.2 %		Elongation (%)
		psi	MPa	psi	MPa
Invar 36	Annealed	71,000	490	35,000	240	42

Availability

Alloy 36 (NILO 36, INVAR 36) is available in Bar, Round Bar, Tube, Rod, Strip, Plate, Sheet, Wire, Welding Wire TIG and MIG, Tooling Plate. For all stock availability contact Sales.

Invar 36 Tube is available the following size ranges.
Outside Diameter - 0.25mm (0.010") up to 16.00mm (0.625")
Wall - 0.05mm (0.002") up to 1.00mm (0.040")
Straight Lengths - 1.00mm (0.040") up to 5000.00mm (197")
Coils Lengths - 5 Metres to 15 Metres
Standard Tolerance- OD &ID +/-0.03mm (0.0012")
Wall +/- 10%
Tight Tolerance - OD&ID +/- 0.015mm (0.0006")
Wall +/-3%
Some thin wall tubes up to 25.40 mm (1.000") can be supplied.

We are experts in difficult to obtain sizes contact Sales for many other sizes and forms

Invar 36 Stock - Alloy 36
Invar 36 Round Bar	Invar 36 Plate
6.35 mm dia	6 mm THK
12.00 mm dia	10 mm THK
16.00 mm dia	13 mm THK
20.00 mm dia	19 mm THK
22.22 mm dia	25 mm THK
25.00 mm dia	30 mm THK
30.00 mm dia	40 mm THK
35.00 mm dia	50 mm THK
40.00 mm dia
45.00 mm dia
50.00 mm dia

Hot Rolled Plate Invar 36
Th		Width		Length
0.187"	X	72"	X	96"
0.250"	X	72"	X	96"
0.375"	X	72"	X	96"
0.500"	X	72"	X	96"
0.625"	X	70"	X	72"
0.750"	X	16"	X	100"
1.00"	X	16"	X	56"
1.50"	X	16"	X	46"
2.00"	X	20"	X	60"
2.50"	X	8.25"	X	51"
4.00"	X	7.125"	X	18.5"
4.625"	X	5"	X	51"
5.00"	X	12.7"	X	15.5"

Cold Rolled Sheet - Invar 36
Thickness		Width		Length
0.015	x	10.5	x	72
0.030	x	24	x	72
0.041	x	24	x	72
0.060	x	24	x	60
0.060	x	24	x	120
0.100	x	24	x	72
0.125	x	24	x	60
0.125	x	24	x	120

Invar Rod - Invar 36
Dia		Length
0.078	x	36
0.093	x	36
0.100	x	72
0.125	x	120
0.250	x	72
0.500	x	144
0.750	x	144
1.0	x	144
1.125	x	144
2.0
3.0
4.0

Invar Welding Wire - Invar 36
0.45	x	MIG Spools 25lb
0.096	x	36 TIG pkg'd in 10lb tubes
0.078	x	36 TIG
0.093	x	36 TIG

We are experts in difficult to obtain sizes contact Sales for many other sizes and forms. Invar 36 Registered trademark of Carpenter Technology Inc.

Specifications

UNS K93600, K93601
Werkstoff Nr. 1.3912
ASTM B 388, ASTM B 753, DIN 1715 (Sheet and Strip)
ASTM F-1684
MIL-S-16598 and MIL-I-23011 CL 7
Trademarks - NILO 36 and INVAR 36
FeNi36

Invar 36 (FeNi36) / 1.3912

Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel. Alloy 36 maintains nearly constant dimensions over the range of normal atmospheric temperatures, and has a low coefficient of expansion from cryogenic temperatures to about 500°F. This nickel iron alloy is tough, versatile and retains good strength at cryogenic temperatures.

Material Data Sheet

ASTM	F1684
UNS	K93603

---

---

---

---

Material Outlet by Hempel

taashvialloy.com offers buyers a new and uncomplicated procurement channel, which also includes small quantities and materials in special alloys at favourable conditions.

Product Count

Services