SUPER DUPLEX UNS S32760 by Taashvi Special Alloys
Zeron® 100, Super Duplex Stainless Steel
- UNS S32760, F55
- ASTM A240, A276, A314, A473, A479, A815
- Norsok MDS 055, Werkstoff 1.4501
Forms of Zeron 100, super duplex stainless steel available at Taashvi Special Alloys
- Plate
- Bar
- Pipe
-
Fittings
- Elbows, tees, stub-ends, returns, caps, crosses, reducers, pipe nipples, etc.
- Flanges
- Welding Products
Zeron 100 Overview
Zeron 100, super duplex stainless steel, is a highly alloyed stainless steel designed for use in aggressive environments. High strength, toughness, excellent corrosion resistance and its resistance to corrosion in a wide range of organic and inorganic acids are just a few characteristics that make this duplex stainless steel attractive to a variety of industries. Lastly, it is highly resistant to strong alkalis and resists corrosion in many non-oxidizing acids.
Use of this super duplex stainless steel is not recommended when it involves extended exposure to temperatures greater than 572° F. This exposure causes a substantial reduction in toughness.
Notice the chemical composition of duplex 2507 and Zeron 100 are similar however; Zeron 100 contains slightly more copper and tungsten. The copper content (min. 0.5, max 1.0) permits excellent resistance to corrosion in many non-oxidizing and mineral acids like hydrochloric and sulfuric acid.
What are the characteristics of Zeron 100, super duplex stainless steel?
- Guaranteed corrosion performance (PREn ≥ 40)
- Excellent corrosion resistance in mineral acids such as hydrochloric and sulfuric
- High resistance to pitting and crevice corrosion
- Excellent resistance to stress corrosion cracking in both chloride and sour environments
- High resistance to erosion corrosion and corrosion fatigue
- Excellent mechanical properties
- Possibility for weight reduction over austenitic, standard duplex and nickel base alloys
- Good weldability
Chemical Composition, %
| Cr | Ni | Mo | C | W | Cu | N | Mn | Si | P | S | Fe |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
24.0-26.0
|
6.0-8.0
|
3.0-4.0
|
0.030 Max
|
0.5-1.0
|
0.50-1.0
|
0.2-0.3
|
1.00 Max
|
1.0 Max
|
0.03 Max
|
0.01 Max
|
Balance
|
In what applications is Zeron 100, super duplex stainless steel used?
- Oil and gas industry applications
- Pollution control
- Pulp and paper
- Power generation
- Flue-gas desulfurization
- Chemical, pharmaceutical
- Desalination
- Mining and mineral industries
- Marine industries
ASTM Specifications
| Pipe & Tube | Sheet/Plate | Bar |
|---|---|---|
|
A790, A928, A789
|
A240
|
A276
|
Mechanical Properties
Room Temperature, Solution Annealed Condition
| Tensile Strength, ksi | .2% Yield Strength, ksi | % Elongation in 50mm | Hardness Max. |
|---|---|---|---|
|
109
|
80
|
25
|
28 HRC
|
Zeron® 100 is a registered trademark of RA Materials.
Coil / Sheet /Plate Specification
Dimensions : ASTM, ASME, AISI, DIN, BIS
Thickness : 0.50mm - 100mm
Size : 1000 mm x 2000mm, 1220mm x 2440mm, 4' x 8', 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Shim Sheet, Perforated Sheet, Profile Cut,
Seamless & Welded Pipes & Tubes Specification
Specification : ASTM, ASME, DIN, NFA, JIS.
Thickness : 4.0mm - 100mm.
Pipe Size : 1/8” NB to 24” NB, 1/4” OD to 24” OD sizes.
Tube Size : 1/2" OD to 8" OD.
Length : Cut length, Fix length, Single Random, Double Random & Required Length.
Form : Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pancake Coils, Hydraulic Tubes.
End : Plain End, Beveled End, Threaded End.
Type : Seamless & Welded Pipes & Tubes.
Round Bar Specification
Dimensions : ASTM, ASME,AISI, API.
Size : 5 mm to 500 mm
Length : from 2.00mm to 6.35mm (0.078" to 0.25") dia.
Finish : Bright, Black, Polish, Forged
Form : Round Bar, Square, Hexagon
Condition : Cold Drawn & Polished Cold Drawn, Centerless Ground Bars & Polished
Other Services : Machining (CNC), Centerless Grinding (CG), Heat Treatment, Annealing, Pickling, Polish, Rolling, Forging, Cutting, Bending, Minor Fabrication
Seamless & Welded Pipes & Tubes Fittings Specification
Specification : ASTM, ASME, DIN, NFA, JIS.
Size : 1/8” NB to 24” NB, 1/4” OD to 24” OD sizes.
Form : Elbow, Tee, Reducer, Stub End, End Cap, Pipe Nipple, Weldolet,
End : Beveled End, Threaded. Plain End,
Type : Seamless & Welded Pipe & Tubes Fittings, Buttweld Fittings & Dairy Fittings.
